This is a detailed step-by-step guide for replacing filaments on your printer.
 |
 |
 |
| 1. On the printer screen: Filament-Unload. | 2. Wait for the nozzle to heat up to the target temperature. | 3. After heating, the unloading will start automatically. The extruder will retract the filament. During unloading, you can rotate the spool to arrange the filament. |
 |
 |
 |
| 4. Once unloading is complete, push the spring up, and pull out the filament. | 5. Place a new spool of filament. Use pliers to cut the filament at a 45 ° angle. | 6. Straighten the tip. Then insert the filament and send it into the tube (about 3-5cm). |
|
|
|
 |
| 7. Press Load. | 8. Then the nozzle temperature will rise, and loading will start automatically. | 9. When loading is complete, and use pliers to cut the filament extruded from the nozzle. Keep the print platform clean. Now filament replacement is complete. |