 |
 |
|
2. Use a 2.5 mm hex wrench to remove the screw that secures the print head. |
 |
 |
| 3. Find tweezers or a similar tool. | 4. Gently lift the FFC clip on the print head. |
 |
 |
| 5. Disconnect the FFC cable. | 6. Take the new print head and lift the clip in the same way. |
 |
 |
| 7. Align the FFC cable with the connector and insert it evenly and firmly. | 8. Press down the clip to secure the cable—make sure both ends are pressed tightly and the cable sits flat. |
.jpg) |
 |
| 9. Snap the print head back into its mount. | 10. Reinstall the screw. The replacement is now complete. |
If you have any further questions, please contact service@aoseed.com for assistance.